Latest Testing Updates

Andover Electrical's Testing service provides our customer with a service that is regulated by ELECSA and we are fully qualified to current regulations. We have £5 million public liability insurance specially tailored by the NICEIC for electrical engineers / contractors and all our qualifications and paper work are available upon request. We pride ourselves on quality of service and detail to finish; we believe this makes us stand out from the crowd.
Andover Electrical has an extensive range of testing services available to assist you from Condition reports, Installation reports, PAT testing, Fixed appliance testing & Data Cable testing

Andover Electrical embrace their customer feed back and actively integrate this into the information that is available to you the customer, in the hope that it will guide you to us.

Our Services

Installation Testing & Certification

Periodic / Condition Reports & Certification

Minor works certification

PAT testing and fixed Appliance testing

 

Electrical Testing Services

Periodic Inspection Explained

All electrical installations deteriorate with age and use. They should therefore be inspected and tested at appropriate intervals to check whether they are in a satisfactory condition for continued service. Such safety checks are commonly referred to as 'periodic inspection and testing'.

A periodic inspection will:

Reveal if any of your electrical circuits or equipment are overloaded.
Identify any defective electrical work.
Find any potential electric shock risks and fire hazards
Highlight any lack of earthing or bonding.
Tests are also carried out on wiring and fixed electrical equipment to check that they are safe. A schedule of circuits is also provided, which is invaluable for a property.

How often is a periodic inspection required?

Your electrics should be inspected and tested every:

10 years for an owner-occupied home.
5 years for a rented home.
3 years for a caravan.
1 year for a swimming pool.

Other times when a periodic inspection should be carried out are:

    When a property is being prepared for letting.

    Before selling a property or buying a previously-occupied property.

Who should carry out the periodic inspection and what happens?
Periodic inspection and testing should be carried out only by electrically competent persons, such as registered electricians. They will check the condition of the electrics against the UK standard for the safety of electrical installations, BS 7671 – Requirements for Electrical Installations (IEE Wiring Regulations).

The inspection takes into account all the relevant circumstances and checks on:

    The adequacy of earthing and bonding.

    The suitability of the switchgear and controlgear. For example, an old fusebox with a wooden back, cast-iron switches, or a mixture of both will need replacing.

    The serviceability of switches, sockets and lighting fittings. Items that  may need replacing include: older round-pin sockets, round light switches, cables with fabric coating hanging from ceiling roses to light fittings, black switches and sockets mounted in skirting boards.

    The type of wiring system and its condition. For example, cables coated in black rubber were phased out in the 1960s. Likewise cables coated in lead or fabric are even older and may well need replacing (modern cables use longer-lasting pvc insulation).

    Sockets that may be used to supply portable electrical equipment for use outdoors, making sure they are protected by a suitable residual current device (RCD).

    The extent of any wear and tear, damage or other deterioration.

    Any changes in the use of the premises that have led to, or may lead to, unsafe conditions.

The competent person will then issue an Electrical Installation Condition Report detailing any observed damage, deterioration, defects, dangerous conditions and any non-compliances with the present-day safety standard that might give rise to danger.

If any dangerous or potentially dangerous condition or conditions are found, the overall condition of the electrical installation will be declared to be 'unsatisfactory', meaning that remedial action is required without delay to remove the risks to those in the premises.

Read More..